Byte Brothers TVR10/100 Lan Tester with In-Line Capability

Links - ByteBrothers Home | ByteBrothers RWC1000K | ByteBrothers TVR10/100K

Test, verify and repair 10Base-T and 100Base-T Networks.

The TVR10/100 answers the 10 most common questions
occurring during the repair and install of 10 and 100 Base-T LANs

See the Five Tests Check Device Type Check Device Speed Locate Wires and Cables Cable Verification Instant Link

LAN devices questions answered...

Are my hub or PC ON and transmitting?
Do I require a straight thru or crossover patch cable?
Is my LAN speed 10 or 100 MB/s?
Is the hub or PC reducing my LAN speed to 10MB/s.
Do my hub or PC appear as a hub or PC?

LAN cabling questions answered...

Is a hub or PC connected to my cable?
Does my hub or PC require 2 or 4 pair cables.
What pairs are terminated in my cable?
Where is my cable in the wiring closet?
What hub port is my PC using?
Is my cabling straight thru or crossover?
Does my cable have inverted pair or other faults?


The TVR10/100 is comprised of two units: The "Main unit" and the "Remote Probe." The Main unit performs the bulk of the tests such as determining the LAN device type (is it a hub or PC?) and the LAN speed (10 or 100 MB/s) without the need of the Remote Probe. The Remote Probe adds the ability to trace cable locations (by audibly tracing tones cables with all four pairs to insure compatibility with all three types of Base-T LANs. Broad capabilities: TVR10/100 helps you locate faulty hubs, PCs or cable connections that are stopping or limiting the performance of your 10Base-T or 100Base-T LAN. Designed for both the LAN installer and repair person, it is useful documenting legacy LANs, installing and repairing LANs or adding equipment to existing LANs. Designed specifically for 10 and 100 Base-T LANs: The TVR10/100 has been designed to test LAN devices and cabling designed to the 10 and 100 Base-T standard. This includes wiring paired to EIA(TIA)568B (also called AT&T258A or simply "AT&T"); and EIA(TIA)568A. EIA(TIA)568B is the most popular scheme for 10 and 100 Base-T cabling. EIA(TIA)568A is the most popular scheme for ISDN cabling. USOC pairing (typically used for telephones) is not compatible with the 10 or 100 Base-T standard and is therefore not tested by the TVR10/100. Multiple test sets in one tester: To accomplish its goals, the TVR10/100 performs tests that, prior to the TVR10/100, required 7 different test sets. Plus, the multi-functionality is integrated to provide a combination of quick results that are not available in any other tester. If the TVR10/100 is divided by function, it yields a: Hub/PC verifier that indicates the equipment Device Type (is it a hub or PC?). LAN speedometer that verifies the speed of the link (10 or 100MB/s). Straight thru/crossover cable jacks indicates the patch cable required. On-line network activity monitor indicates when data is being transmitted (and at what speed, etc). Tone probe and tone generator for tracing cable locations (and the port used) Cable pairs tester that verifies what cable pairs are wired and identifies straight thru and crossover configurations. Cable termination tester: Tests for the existence of a LAN device connected at the end of the cable (determines number of cable pairs required by the device). It is not only the individual functions of the TVR10/100 that makes it so useful... but the creative combination of these features that yield an efficient tester that saves time and gets the LAN working quickly. *TVR10/100 List of Functions* The TVR10/100 performs the following functions: 10/100 BASE-T LAN Tests. The TVR10/100 plugs into active hubs and/or PCs to verify 10Base-T or 100Base-T operation. Only the Main Unit is required for these tests. Verifies if PC is ON, if it appears as a PC and maximum speed. Verifies if hub is ON, if it appears as a hub and maximum speed. Verifies PC to hub speed and data transmission. Verifies hub to hub data transmission. Checks if straight thru or crossover patch cable is required. Finds speed bottlenecks on 10 and 100 Base-T LANs. On-line monitors LAN link (between two devices). Cable Testing. The following tests are performed by the TVR10/100 Main Unit and Remote Unit (except where indicated). Locates miswired cables. Locates missing cables. Locates cables that can not support 100Base-T operation (for LANs that require 4 pair wiring).* Tests connection to hub (pairs connected to hub).* Tests connection to PC (pairs connected to hub).* Tests installed cables (pairs wired and type). Tests patch cables (pairs wired and type). Remote Probe helps locate and trace inactive cables. Remote Probe traces active cables connected to hubs and PC without interfering with LAN performance. Test performed by the Main Unit only (does not require the use of the Remote Probe). TVR10/100 LAN TESTER ORDERING INFORMATION* The TVR10/100 includes a Main Unit and a Remote Probe Unit; batteries; 2 RJ45 to RJ45 jumpers, manual and a protective pouch. Patent pending. #TVR10/100K... $219.99

The TVR10/100 is comprised of two units: The "Main unit" and the "Remote Probe." The Main unit performs the bulk of the tests such as determining the LAN device type (is it a hub or PC?) and the LAN speed (10 or 100 MB/s) without the need of the Remote Probe. The Remote Probe adds the ability to trace cable locations (by audibly tracing tones cables with all four pairs to insure compatibility with all three types of Base-T LANs.

Broad capabilities: TVR10/100 helps you locate faulty hubs, PCs or cable connections that are stopping or limiting the performance of your 10Base-T or 100Base-T LAN. Designed for both the LAN installer and repair person, it is useful documenting legacy LANs, installing and repairing LANs or adding equipment to existing LANs.

Designed specifically for 10 and 100 Base-T LANs: The TVR10/100 has been designed to test LAN devices and cabling designed to the 10 and 100 Base-T standard. This includes wiring paired to EIA(TIA)568B (also called AT&T258A or simply "AT&T"); and EIA(TIA)568A. EIA(TIA)568B is the most popular scheme for 10 and 100 Base-T cabling. EIA(TIA)568A is the most popular scheme for ISDN cabling. USOC pairing (typically used for telephones) is not compatible with the 10 or 100 Base-T standard and is therefore not tested by the TVR10/100.

Multiple test sets in one tester: To accomplish its goals, the TVR10/100 performs tests that, prior to the TVR10/100, required 7 different test sets. Plus, the multi-functionality is integrated to provide a combination of quick results that are not available in any other tester. If the TVR10/100 is divided by function, it yields a:

Hub/PC verifier that indicates the equipment Device Type (is it a hub or PC?).
LAN speedometer that verifies the speed of the link (10 or 100MB/s).
Straight thru/crossover cable jacks indicates the patch cable required.
On-line network activity monitor indicates when data is being transmitted (and at what speed, etc).
Tone probe and tone generator for tracing cable locations (and the port used)
Cable pairs tester that verifies what cable pairs are wired and identifies straight thru and crossover configurations.
Cable termination tester: Tests for the existence of a LAN device connected at the end of the cable (determines number of cable pairs required by the device).

It is not only the individual functions of the TVR10/100 that makes it so useful... but the creative combination of these features that yield an efficient tester that saves time and gets the LAN working quickly.

TVR10/100 List of Functions
The TVR10/100 performs the following functions:

10/100 BASE-T LAN Tests. The TVR10/100 plugs into active hubs and/or PCs to verify 10Base-T or 100Base-T operation. Only the Main Unit is required for these tests.

Verifies if PC is ON, if it appears as a PC and maximum speed.
Verifies if hub is ON, if it appears as a hub and maximum speed.
Verifies PC to hub speed and data transmission.
Verifies hub to hub data transmission.
Checks if straight thru or crossover patch cable is required.
Finds speed bottlenecks on 10 and 100 Base-T LANs.
On-line monitors LAN link (between two devices).

Cable Testing. The following tests are performed by the TVR10/100 Main Unit and Remote Unit (except where indicated).

Locates miswired cables.
Locates missing cables.
Locates cables that can not support 100Base-T operation (for LANs that require 4 pair wiring).*
Tests connection to hub (pairs connected to hub).*
Tests connection to PC (pairs connected to hub).*
Tests installed cables (pairs wired and type).
Tests patch cables (pairs wired and type).
Remote Probe helps locate and trace inactive cables.
Remote Probe traces active cables connected to hubs and PC without interfering with LAN performance.

*Test performed by the Main Unit only (does not require the use of the Remote Probe).

TVR10/100 LAN TESTER ORDERING INFORMATION

The TVR10/100 includes a Main Unit and a Remote Probe Unit; batteries; 2 RJ45 to RJ45 jumpers, manual and a protective pouch. Patent pending. #TVR10/100K... $219.99

Please contact Cal-Centron for additional Information.