Complete Line of Enclosed Controls:

• NEMA Type 1 - Metal
• NEMA Type 3R - Metal
• NEMA Type 12 - Metal
• NEMA Type 4X - Reinforced Fiberglass
• X-Proof - Contact Cal-Centron

Features:

• Combinations include type XLSK starter and overload relay complete with precision ambient compensated heaters and differential single phasing protection.
• All combination controls are included with safety door interlock and padlockable operators.

Conformity to Standards:

Fusible / Non-Fusible Combination Controls - Type FCXLS

• UL / CSA Manual Motor Disconnect with door safety interlocks. Industrial Controls Disconnects are load make, load break, UL Listed for motor load switching duty.
• Fuse Blocks are type "J" as standard. For "R" Type, insert at end of part number "R" (same price), for Type "CC" 30 Amp fuse block - add "CC".
• Type XLSK Starter and overload relay complete with precision ambient compensated heaters and differential single phasing protection.

• Step 1 (Size) Choose from the UL HP and Voltage list per your application.
  Example: 5HP 230V 3 Phase = Part number FCXL7K-1*
• Step 2 (Coil *) From the coil suffix chart (below), select the appropriate coil suffix
  Example: 120VAC Coil = A / Part number FCXL7K-1A-*
• Step 3 (Overload Amps **) This step requires a suffix for your overload protection
  (Refer to Overload Relay Suffix Table below)
  Example: 5HP @ 230VAC 3 Phase, if full load Amps is 13 = Suffix "N"
• Step 4 (Enclosure) Specify "Open" or "Enclosed" requirements.
  Example: If NEMA12 is required = FCXLS7K-1A-N-M4

Breaker Type: Combination Controller - Type BCXLS Includes:

• UL508 Circuit Breaker
• Breakers, 600 Volt are Internationally accepted Industrial Control Breakers with instantaneous and thermal trip.
• Door handle safety interlocks
• Type XLSk Magnetic starters with precision and consistent overload protection and different single phasing protection.
• Space and drilling for fused control circuit transformer (optional)

• Step 1 (Size) Choose from the UL HP and Voltage list per your application.
  Example: 5HP 230V 3 Phase = Part number BCXL7K-1*
• Step 2 (Coil *) From the coil suffix chart (below), select the appropriate coil suffix
  Example: 120VAC Coil = A / Part number BCXL7K-1A-*
• Step 3 (Overload Amps **) This step requires a suffix for your overload protection
  (Refer to Overload Relay Suffix Table below)
  Example: 5HP @ 230VAC 3 Phase, if full load Amps is 13 = Suffix "N"
• Step 4 (Enclosure) Specify "Open" or "Enclosed" requirements.
  Example: If NEMA12 is required = BCXLS7K-1A-N-M4