FC TECX and FCTEC SERIES - Fusible and Non-Fusible Combination Controls

Industrial Controls Home | Contactor Home

Heavy Duty Series - EEC / TEC Series Contactors | EEC Overloads

Special Purpose Series - ECX Series Contactors | ECX Overloads

Special Purpose Combination Controls Fusible & Non-Fusible | TEC Compact NEMA 4X Starters

Fusible / Non-Fusible Combination Controls

UL / CSA Manual Motor Disconnect with door safety interlocks. Industrial Controls Disconnects are load make, load break, UL Listed for motor load switching duty.
Fuse Blocks are type "J" as standard. For "R" Type, insert at end of part number "R" (same price), Type "CC" 30 Amp fuse block - Standard on FC TECX 18.
Type TECX & TEC Starter and overload relays are complete with precision ambient compensated heaters and differential single phasing protection.

FCTECX - 5HP to 50HP

Voltage	Design Rating UL	Fuse Block Amps	Catalog No. Type FC TECX-	Fusible Disconnect Type Enclosed			Non Fusible #NFC TECX Add "N" to part # for Non Fusible Omit Fuse Block Deduct:
Voltage	Design Rating UL	Fuse Block Amps	Catalog No. Type FC TECX-	(Metal) General Purpose NEMA1 -M01	(Non-Metal Dust Tight Outdoor NEMA4X -4X	(Metal) Dust Tight Drip Tight NEMA12/4 -M4
200/230	5	30CC	FC TECX-18-1-*-	$510	$620	$620	$-26
460	10	30CC	FC TECX-18-2-*-	$510	$620	$620	$-26
200/230	10	60	FC TECX-32-1-*-	$545	$690	$690	$-26
460	20	60	FC TECX-32-2-*-	$545	$690	$690	$-26
200/230	15	60	FC TECX-65-1-*-	$700	$790	$790	$-26
460	30	60	FC TECX-65-3-*-	$700	$790	$790	$-26
200/230	25	100	FC TECX-95-1-*-	$850	$990	$990	$-26
460	50	100	FC TECX-95-2-*-	$850	$990	$990	$-26

FCTEC - 40HP to 200HP

Voltage	Design Rating UL	Fuse Block Amps	Catalog No. Type FC TEC-	Fusible Disconnect Type Enclosed			Non Fusible #NFC TEC Add "N" to part # for Non Fusible Omit Fuse Block Deduct:
Voltage	Design Rating UL	Fuse Block Amps	Catalog No. Type FC TEC-	(Metal) General Purpose NEMA1 -M01	(Non-Metal Dust Tight Outdoor NEMA4X -4X	(Metal) Dust Tight Drip Tight NEMA12/4 -M4
200/230	40 / 60	100	FC TEC-150-*-	$1170	$1430	$1430	$-52
460	100	200	FC TEC-150-*-	$1170	$1430	$1430	$-52
200/230	50 / 60	200	FC TEC-185-*-	$1390	$1650	$1650	$-52
460	125	200	FC TEC-185-*-	$1390	$1650	$1650	$-52
200/230	75 / 100	400	FC TEC-330-*-	$2150	$2660	$2660	$-88
460	200	400	FC TEC-330-*-	$2150	$2660	$2660	$-88

Steps to Order Motor Starter:

Step 1: Size - Choose from the UL HP and Voltage list per your application.
Example: 5HP 230V 3 Phase Part Number - FC TECX18-1*

Step 2: Coil * - From the coil suffix chart below select the appropriate coil suffix.
Example: 120VAC Coil = A - Part #FC TECX18-1A-

Step 3: Overload Amps ** - This step requires a suffix for your overload protection, refer to "Overload Relay Suffix Table" below.
Example: 5HP @ 230V 3 Phase, if 13 Full Load Amps = Suffix "13A"

Step 4: Enclosure - Specify "Open" or "Enclosed" requirments.
Example: If NEMA 12 Complete Part # FC TECX18-1A-13A-M4

* Coil Voltage Suffix

** Overload Suffix

* - Add Suffix to Part Number	AC Voltage
-A	120V
-C	208 / 230V
-E	480V
-F	600V
-D	380V
-G	24V
-H	280V

** - Add Suffix to Part Number	Overload Amp Range
-.63A	.4 to .63A
-1A	.63 to 1A
-1.6A	1 to 1.6A
-2A	1.25 to 2A
-2.5A	1.6 to 2.5A
-4A	2.5 to 4A
-6A	4 to 6A
-8A	5.5 to 8A
-10A	7 to 10A
-13A	9 to 13A
-18A	12 to 18A
-25A	17 to 25A
-32A	23 to 32A
-36A	28 to 36A
-40A	30 to 40A
-50A	37 to 50A
-65A	48 to 65A
-80A	63 to 80A
-93A	80 to 93A

Please contact Cal-Centron for additional Information.