IVEX CAD Software - Schematic and PCB Design

Schematic and PCB Design

WinDraft®
Install WinDraft® schematic design tool on your PC and in minutes you'll be designing schematics. Everything is included for wiring, drawing, printing and finishing your design. A full graphical library editor and title block editor are included. A library part may be created from scratch, shapes imported from other parts, and graphical definitions can easily be edited. WinDraft® provides all you expect and more. User definable on-line ERC identifies problem areas in the circuit so they do not make their way into the final design. Bill of Materials (BOM), cleanup to remove overlapping wires, and annotation are included. On-line help is only a click away and includes the complete reference manual. WinDraft® is the ideal front end tool for our PCB layout. You can even specify track widths and isolations right in the schematic.

PDF WinDraft Information Pages

WinBoard®
WinBoard® PCB layout delivers the most sophisticated interactive routing capability available for the Windows environment. It has the power needed for even complex board design, and the tools for high speed circuits, analog design and dense SMT boards. WinBoard® comes complete with a library of over 700 module footprints including over 350 SMT footprints. Pad stacks may be edited on-line by just double clicking on the pad. A graphical editor is included to create custom module footprints or edit existing ones. Placing multiple copper pours is as quick and easy as routing. Outputing to In-Circuit Test, NC Drill, Gerber, Pick and Place plus others is included.

PDF WinBoard Information Pages

IvexView™
IvexViewTM is a Gerber viewer that makes it easy to check your photo plots before making expensive film. View reads Gerber files from WinBoard® PCB and over 20 other venders. Using a viewer to check photoplot files allows you to look for irregularities in the Gerber output. Then if a problem is found, the board can be corrected and a new output generated. This can save time and money! IvexViewTM has the same look and feel as WinDraft® and WinBoard®. In addition to previewing files, you can manage multi-layer designs in one job file, highlight D-Codes, and print positive or negative outputs.

PDF IvexView Plus Information Pages

Ivex Spice™
IVEX SpiceTM is an analog simulation product that allows the user to instantly test their design circuit on screen versus what could take hours or days on a breadboard. Additions or changes to your circuit can be tested with IVEX SpiceTM using up to several types of analysis. It displays on-screen waveforms that allow you to find flaws in your design that are difficult to reproduce on a test bench. For example, what happens to the circuit when a resistor is slightly out of tolerance or if the temperature exceeds manufacturer specifications? IVEX SpiceTM uses proven Berkley Spice technology and the latest XSpice extensions for results you can count on.

PDF Ivex Spice Information Pages

ORDERING INFORMATION
CAD Program		Pin Capacity	NTE P/N	Sugg. Resale
WinDraft^®		200	WD01V3	$39.95
		350	WD350	$125.00
		650	WD650	$299.00
		Unlimited	WDUNL	$599.00
WinBoard^®		200	WB01	$39.95
		350	WB350	$125.00
		650	WB650	$299.00
		Unlimited	WBUNL	$599.00
IVEX Spice^TM	Standard	-	IVEX-SPICE-STD	$149.00
IVEX Spice^TM	Advanced	-	IVEX-SPICE-ADV	$349.00
Note: 1 component lead equals 1 pin (i.e. 14-lead DIP IC uses 14 pins; TO-92 type transistor uses 3 pins; axial lead resistor uses 2 pins; etc.)

Please contact Cal-Centron for additional Information.