PLATT LUGGAGE INC
Quality that lasts.

 

Blow Molded Cases

These cases are manufactured from prime, high-density polyethylene, with double wall construction.  The textured exteriors resist dents, cracking and scuffs.  The shells are unaffected by extreme temperatures.  Foam-filled  cases are filled with layers of cubed foam and a flat cushion in the bottom and/or flat cushion in the lid.

The hardware features mechanical latches that are field replaceable, and a mechanical hinge system that is made to last.

All cases meet U.S. 94B Specifications as an electrical insulator and are impervious to chemical attack.


Part Number Inside Dimension Outside Dimension
L W D L W D
107 7 1/2" 5" 2 1/8" 8 1/2" 6" 2 1/2"
207 9 1/2" 6" 2 5/8" 10 1/2" 7" 3"
307 11" 7" 3 3/8" 12" 8" 3 3/4"
407 12 1/2" 9" 5 1/8" 13 1/2" 10" 5 1/2"
507 14" 10" 4" 15" 11" 4 3/8"
607 16" 11" 2 7/8" 17" 12" 3 1/4"
707 17 3/4" 12 3/4" 7 1/8" 19" 14" 7 3/4"

Please contact Cal-Centron for additional Information.


Copyright © 1999 - 2012 Cal-Centron. All rights reserved.