|
SULLSTAR / PLATINUM TOOLS |
EZ-RJ45® and EZ-RJ12/11® Connectors |
![]() EZRJ45® CAT6 |
![]() EZRJ45® CAT5e |
||||||||||||||||||
Description The new patented EZ-RJ45®, New EZ-RJ45® CAT6+ and New EZ-RJ12/11® connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical perpormance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improve it performance!
Application
Technical Data
* Crimp and cut action on the new EZ-RJ12/11 connector requires using the new Professional EZ-RJ45® Crimp Tool Pro Model 100044. You may use the standard EZ-RJ45® model 100004, but it will not trim cut wire at the end of the connector. Please call Cal-Centron if you have any questions. |
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
Please contact Cal-Centron for additional Information.
Copyright © 1999 - 2009 Cal-Centron. All rights reserved. |