VYNCKIER VJ SERIES ACCESSORIES

Hinges
  • The VJ-Series non-metallic hinges allow the cover to open at an angle exceeding 180.
  • The cover can be lifted off and reinstalled without the use of a tool, which substantially reduces the operations within the cover. (Lift off optional upon request.)
  • By simply adjusting one of the pivot parts, the cover becomes unremovable.

VJNMH

Set of 2 pieces


Surface-mounted windows (screw assembly)
SW97

NEMA 4X (UL listed if factory installed)
H x W: 10.31 x 8.31

SW84N

NEMA 4X IP67 with nameplate provided
(UL listed if factory installed)
H x W: 9.45 x 5.47

SW84X

NEMA 4X IP67 (UL listed if factory installed)
H x W: 8.54 x 5.47


Latches
VJLL KIT / Optional twist latch


Air Vents
  • Two air vents must be mounted per enclosure to ensure sufficient air circulation and prevent condensation water.
  • Complete with template and screws.
  • The air vents are preferably mounted in the upper and lower part of the box.

Set of two pieces in polyamide per package. UL listed if factory installed.


BACKPANEL STAND-OFFS

Aluminum with 10-32 thread to match back plate inserts and screws.


EMI-RFI Protection
Forward

Electromagnetic pulses (EMPS) may adversely affect electronic and other control systems. These disturbances may be such that they cause erratic operation, component failure or a reduction in component life. This electromagnetic energy, called EMI, has become an added pollutant in the radio spectrum.

Vynckier can provide EMI-RFI shielded enclosures which give effective protection against electromagnetic and radio frequency interference, hence the designation EMI-RFI.

Application

The EMI-RFI enclosures have been especially designed to overcome the problems frequently arising from power supplies featuring non-sinusoidal input current waveforms, such as those produced by energizing and deenergizing transformers and regulators, the on and off switching of digital electronic controls, etc.

The EMI-RFI enclosure is made of insulating molding material, suitable for installation outdoors or indoors, that serves a double duty:

  • It attenuates the radiation of enclosed EMI generating appliances from getting OUT.
  • It guards sensitive equipment from breakdowns and destruction due to EMI radiation getting IN.

SW32
SW44
SW64
SW84

Available as SW84N (with provision for nameplate) or SW84X (without provision for nameplate)

* Note UL listed for NEMA 4X
If factory installed in any enclosure 1" clearance on all four sides is required for installation

SW97
95HCD

Molded Instrumentation Windows
SCREW ON WINDOWS, WATERTIGHT (POLYCARBONATE)
 
 
SW32
3 x 2
VJ606
VJ606
 
SW44
4 x 4
VJ606
VJ606
 
SW64
6 x 4
VJ806
VJ1008
 
SW84+
8 x 4
VJ806
VJ1008
 
SW97+
9 x 7
VJ1008
VJ1210
 
Inspection Type NEMA 12
 
55SC
5 x 5
VJ806
VJ806
 
Hinged Cover Type NEMA, 3, 3R, 12
 
95HCD
9 x 5
VJ1210
VJ1008
 
*UL listed if factory installed.
Template included.
PROJECTION ABOVE COVER
1. SW32 -.5"
2. SW44 -.3125"
3. SW64 -.3125"
4. SW84 -.25"
5. SW97 -.25"
6. 95 HCD -.52"

New Non-Metallic Enclosure Line
Allied Moulded Products - Fiberglass and PVC Enclosures

Please contact Cal-Centron for additional Information.


Copyright © 1999 - 2012 Cal-Centron. All rights reserved.