ACME STAPLE CO.
Staple Guns for Wire and Cable
  • Model: 25A - Only $33.49
  • Model: 25AC / CAT5E & RG6/RG59
  • Model: 75A / Siamese Cable / Twin Coax
  • Crush-Free Broadband / LAN Installation at a Fraction of the Cost of Competing Methods
  • Bottom-Load Magazine
  • Jamless Design
  • Ergonomic Safety Handle
  • Easy Squeeze
  • Patented Broadband Stapling Products
  • Lifetime warranty
  • Only Acme staple guns feature high-visibility safety yellow "Sure-Grip" handles and integral hand-stop for maximum year-round comfort and safety.

  • NM Building Wire
  • Communications
  • DSL
  • CAT5 and Beyond
  • Broadband
  • Coaxial
  • Alarm
  • Audio / Video / Data
  • CATV
  • CCTV
  • Electronics
  • Thermostat
  • Control Wire
  • Computer Cable
  • Conduit
  • Tubing

 

  • Their unique loading system makes Acme staple guns faster, safer, and more reliable than ever before.
  • If it says Acme on it, they'll stand behind it. They're so sure you'll be satisfied with the new and improved staple guns that each one comes with a limited lifetime warranty

 


MODEL
LEG LENGTH
FINISH
MAX. WIRE/CABLE DIA.
18A
3/8", 7/16" (9, 11 mm)
Galvanized steel with or without painted crown or corrosion-resistant Monel® or stainless steel with or without painted crown
3/16" (5 mm)
25A
9/32", 3/8", 7/16", 9/16"
(7, 9, 11, 14 mm)
1/4" (6 mm)
25AC
19/32" (15 mm)
15/64" (5.95 mm)
37A
3/8", 1/2", 9/16" (9, 13, 14 mm)
3/8" (9 mm)
37AC
19/32" (15 mm)
19/64" (7.5 mm)
75A
9/16", 5/8", 7/8" (14, 16, 22 mm)
1/2" (13 mm)
75A
5/8" NM, 7/8" NM
For NM Building Wire, UL Listed
1/2" (13 mm)
Monel® is a registered trademark of INCO, Co.

MODEL18A for Max. Wire & Cable Dia. 3/16” (5mm)
Available Leg Lengths: 3/8”, 7/16” (9, 11mm)
Bell Wire
20/2 awg
CAT 3 Wire
2-4 pair
Fire alarm cable
18/2 awg
Security system cable
22/2 awg
Stranded wire
up to 12 awg
Telephone station wire
2-4 pair
Thermostat wire
18/ 2 awg
MODEL 25A for Max. Wire & Cable Dia. 1/4” (6mm)
Available Leg Lengths: 9/32”, 3/8”, 7/16”, 9/16” (7,9,11,14 mm)
Bell Wire
18/3 awg
CAT 3 Wire
3-12 pair
Fire alarm cable
18/2 and 18/4 awg
Security system cable
18/2 awg
Stranded wire
8 and 10 awg
Telephone station wire
6 pair
Thermostat wire
18/3 through 18/8 awg
MODEL 25AC* for Max. Wire & Cable Dia. 1/4” (6mm)
Available Leg Length: 19/32” (15mm)
Broadband
Cat 5 and up
Broadband
Coaxial Cable RC6/59
MODEL 37A for Max. Wire & Cable Dia. 3/8” (9mm)
Available Leg Lengths: 3/8”, 1/2”, 9/16” (9,13,14mm)
CAT 3 Wire
12-32 pair
Coaxial Cable
RG59/62
Thermostat Wire
18/7 (Flat)
MODEL 37AC* for Max. Wire & Cable Dia. 11/32” (9mm)
Available Leg Length: 19/32” (15mm)
Broadband Coaxial Cable RG6QUAD/59 and others
MODEL 37AC* for Max. Wire & Cable Dia. 11/32” (9mm)
Available Leg Length: 19/32” (15mm)
Broadband Coaxial Cable RG6QUAD/59 and others
MODEL 37AC* for Max. Wire & Cable Dia. 11/32” (9mm)
Available Leg Length: 19/32” (15mm)
Broadband Coaxial Cable RG6QUAD/59 and others
  • Protected by US Patent 6,848,607. Other patents pending.
  • Models 25AC and 37AC are designed to drive the specially configured staples to a predetermined depth in most substrates, thus making it virtually impossible for the Broadband wires to be crushed.
  • USE SPECIAL 25AC & 37AC STAPLES ONLY.
  • All staple types available in Galvanized Steel or Corrosion Resistant Monel® or Stainless Steel with or without Painted Crown. Monel® is a registered trademark of INCO, Co.

Incredible Savings Using the Acme 75A Stapling System for NM-B Wires

Model 75A stapler & UL listed staples comply with NEC 2005 code 334.30 that reads in part "nonmetallic-sheathed cable shall be secured by staples designed and installed so as not to damage the cable."

UL Listed

Peace of mind knowing you’re using UL Listed products for NM 14/2, 14/3, 12/2, 12/3, 10/3, Twin 14/2 and Twin 12/2

Low Price

As much as 40% below the competition

Fewer Staples Required

Unique “Single staple installation” for NM 14/2 and 12/2 uses 50% fewer staples

Shorter Installs

Reduce staple installation time by more than 300%

Insulated vs.
Non-insulated Staples

Many local codes permit use of UL Listed non-insulated staples driven by staple guns as an alternative to hammer-in insulated staples, because of the gun’s controlled staple driving depth. NO DAMAGE TO THE WIRE!

Please contact Cal-Centron for additional Information.

Special Offers | Closeout Specials   |  Newsletter Signup  |  E-Mail 
  Terms and Conditions  |  Company Info  |  About Us  | Locate Us  |  Need-To-Know

Copyright © 1999 - 2012 Cal-Centron. All rights reserved.