ALLIED MOULDED PRODUCTS, INC
Polyline™ Polycarbonate Enclosures
Metal Snap Latch Hinged Cover Cover - Clear Polycarbonate

   

AMP Polyline Banner

POLYLINE™ comes standard with "industry exclusive" multi-mounting capability including an out-of-the-box mounting flange or adjustable mounting feet which adapt to various mounting configurations. Featuring metallic or nonmetallic lathes and molded-in latch keepers and mounting bosses, a tongue and groove seal joint between cover and base POLYLINE™ is the ultimate in polycarbonate enclosures. A clear polycarbonate cover option is also available for instrumentation applications where critical electronic equipment must be visible and protected from the elements.

 
UL
RoHS
CSA
 
  • UL Types 1, 2, 3, 4, 4X, 12 and 13
  • DSA Types 1, 2, 3, 3R, 4, 4X, 12 and 13
  • NEMA Types 1, 2, 3, 3R, 4, 4X, 12 and 13
  • IEC 60529 Type IP66
  • Enclosure flammability V-0 per UL 94
  • Joint Industrial Council (JIC) sizing
  • UV rating (f1) per UL 746C - UV stabilized for outdoor use
  • Compliant with RoHS directive
  • Optional back panels (white painted steel and aluminum) and hinged front panels (aluminum)
  • Optional mounting hardware based on model number - foot or flange mount
  • Additional molded-in mounting bosses available for directly mounting DIN rails.
 
  • Injection molded polycarbonate thermoplastic - clear cover, enclosure base, snap latches, feet and flanges
  • Clear cover, base, padlockable snap latches, feet, and flanges - Light gray color (RAL 7035)
    Note: flanged models are pre-assembled, foot models mounting hardware supplied in a bag.
  • Stainless steel padlockable snap latches, hinge pin and foot / flange mounting hardware
  • Cover seal - closed cell neoprene cord encased in a continuous tongue and groove channel
  • #10-32 threaded brass inserts are installed for optional back panel mounting
 
Polyline Diagram
Polyline Diagram
Polyline Diagram
Polyline Diagram
Polyline Diagram
Polyline Diagram
 
 
Box Size
Inside Dimensions
Usable
Depth
Panel Boss Centers
Flange Mount Centers
Foot Mount Centers
Cover Size
Nominal
Wall
Thickness
A
B
C
F
S
Z
J
I
H
L
K
M
W
U
AMP664CCLF
5.93
6.16
3.98
4.18
4.25
4.25
4.00
6.88
6.75
4.91
6.75
5.89
5.67
6.72
6.50
0.14
151mm
156mm
101mm
106mm
108mm
108mm
102mm
175mm
171mm
125mm
171mm
150mm
144mm
171mm
165mm
3.7mm
AMP864CCLF
7.94
6.16
3.98
4.18
6.25
4.25
4.00
8.88
8.75
4.91
8.75
5.89
7.67
6.72
8.58
0.14
202mm
156mm
101mm
106mm
159mm
108mm
102mm
226mm
222mm
125mm
222mm
150mm
195mm
171mm
215mm
3.7mm
AMP1084CCLF
9.93
8.15
3.98
4.18
8.25
6.25
6.00
10.75
6.91
10.75
7.89
9.67
8.72
10.50
0.14
252mm
207mm
101mm
106mm
210mm
159mm
152mm
273mm
175mm
273mm
200mm
246mm
221mm
267mm
3.7mm
AMP1206CCLF
11.92
10.15
5.98
6.18
10.25
8.25
8.00
12.75
8.82
12.70
9.89
11.67
10.72
12.50
0.14
303mm
258mm
152mm
157mm
260mm
210mm
203mm
324mm
224mm
323mm
251mm
296mm
272mm
318mm
3.7mm
AMP1426CCLF
13.94
12.16
5.98
6.18
12.25
10.25
10.00
14.75
14.62
10.82
14.70
11.89
13.67
12.72
14.50
0.14
354mm
309mm
152mm
157mm
311mm
260mm
254mm
375mm
371mm
275mm
373mm
302mm
347mm
323mm
368mm
3.7mm
  • Enclosure base part numbers come standard with 4 separately bagged feet (ex. AMP664H)
  • Add "F" to the part number for factory installed flanges (ex. AMF664HF)
  • "I" dimensions with multiple numbers indicate slotted holes
  • All dimensions are in inches unless otherwise noted
 
  • Car Wash Equipment
  • Irrigation Systems
  • Waste Water Treatment
  • Poultry Processing Equipment
  • Instrumentation
  • SCADA Systems
  • Marinas
  • Pool and Landscape Lighting
  • Agriculture
  • Parking Lots and Garages

Please contact Cal-Centron for additional Information.

Special Offers | Closeout Specials   |  Newsletter Signup  |  E-Mail 
  Terms and Conditions  |  Company Info  |  About Us  | Locate Us  |  Need-To-Know

Copyright © 1999 - 2015 Cal-Centron. All rights reserved.