Coded Magnets - Safety Interlock Switches

Safety Modules for Monitor and Control

 
 
Electro-Mechanical Switch with Solid State Coding

 

 

 

AMX3, AMX4, AMX5:
Non-contact and Coded Safety Switch, Total Safety in Category 3 (pdf 126kb)

An anti-tamper electronic double interactive decoding switch, which is automatically monitored. The switch presents the following advantages : autonomous, non-contact, waterproof to IP67, high authorized misalignment. Therefore, it can replace any mechanical or magnetic safety switches. The AMX is available in polycarbonate and in stainless steel 316L. It is aimed to control the position of the dangerous machines 'doors'. This switch is highly recommended for the food industry (stainless steel 316L).

  • No safety module needed!
  • The AMX3 and AMX5 have been approved by TÜV in category 3.
  • The AMX3, AMX4 and AMX5 are UL/CSA approved.

 

OPTO2S, OPTO3SC, OPTO4SC :
Coded Non-contact Safety Switch for Tiny Access (pdf 596kb)

A coded magnet safety switch with LED indicator to show when unit is in the "on" position. Category 1 without separate safety module. Level 3 "daisy chained" (in series) with one separate safety module. Level 4 with separate safety module. Magnet housings are Polycarbonate and are submersible (NEMA 4X, IP67).

  • CE, EN60947-5-1

2SSR24V, 2SSR24BX:
Non-contact Multicode Safety Switch for the Positioning of Moving Protectors
(pdf 583kb)

3SSR24. 4SSR24, 5SSR24:
Non-contact Coded Electro-mechanical Safety Switch In Stainless Steel for Machine Guards Control (pdf 1083kb)

A coded magnet safety switch with LED indicator to show when unit is in the "on" position. Safety Category 1 without a separate module, This series offers up to 8 different codes, a red LED indicator to show when the unit is "ON", indicating that the door is closed. The housing is made of Polycarbonate, submersible (NEMA 4X, IP67), and internally fused.

  • C -UL (Approval expected March 2004)
  • CE, EN 954-1/2, EN60 947-5-1

 

FURTIF VIGIL:
Non-contact Multicoded Switch, Total Safety in Category 4
Stand Alone without a Safety Module Switches (pdf 264kb)

The VIGIL is the first electromechanical switch with electronic coding which is available in 124 different codes. So, it is totally uncheatable. This switch has a real internal safety module with its test loop and its reset. The VIGIL SXRS is category 4 according to EN954-1 and offers the highest level of safety in an ultra-compact device. Available in polycarbonate or stainless steel 316L, the VIGIL is convenient to all industry sectors.

  • The VIGIL SXRS has been approved by TÜV in category 4.
Solid State Switches to be Monitored Exclusively with BTI Safety Modules
Non Stand-alone Safety Switch (use with Awax Safety Module)

 

ANATOM 6S, 78S, 98S (use with Awax Safety Module):
Coded Non-contact Safety Switch for the Moving Protectors of Dangerous Machines (pdf 377kb)

ANATOM78S / INOX (use with Awax Safety Module):
Coded Non-contact Safety Switch in Stainless Steel for Hard Environments
(pdf 178kb)

ANATOM78S M12 (use with Awax Safety Module):
Coded Non-contact Safety Switch for the Control of machine Guards (pdf 158kb)

ANATOM78S SRM M12 (use with Awax Safety Module):
Coded Non-contact Safety Switch with Magnetic Latch for the Control of machine guards (pdf 158kb)

ANATOM78S SES M12 (use with Awax Safety Module):
Coded Non-contact Safety Switch with Automatic Ejection for the Moving Protectors of Dangerous Machines (pdf 159kb)

ANATOM6S M12 (use with Awax Safety Module):
Coded Non-contact Safety Switch for the Moving Guards of Dangerous Machines
(pdf 153kb)

ANATOM98S M12 (use with Awax Safety Module):
Coded Non-contact Safety Switch for the Control of Machine Guards (pdf 150kb)

ANATOM M18 (use with Awax Safety Module):
Cylinder Style M18 Non-Contact and Coded Electronic Switch for the Position Control
(pdf 322kb)

A coded switch with the advantage of being an economical option. It is available in polycarbonate and in stainless steel 316L. It can only work with a safety relay from the AWAX range. It is aimed to control the access to very dangerous machines, which are equipped with numerous doors. It is highly for the food industry (stainless steel 316L).

 

OPTOPUS DEC (use with Awax Safety Module):
Non-contact and coded Electronic Switch for the Position control (pdf 437kb)

OPTOPUSC M8 (use with Awax Safety Module)
Coded Non-contact Safety Switch for the Moving Guards of Dangerous Machines
(pdf 437kb)

A coded switch, which presents the advantage of being of a small size. It can only work with a safety relay from the AWAX range. This solution is aimed to control the access to very dangerous machines.

  • The OPTOPUS is CE, EN 954-1, EN 60947-5-1/2/3 approved.

 

TRITHON (use with Awax Safety Module)
Electronic coded Non-contact Safety Switch, Stainless + High Heat 230° F
(pdf 129kb)

A coded and cylindrical safety switch. It is waterproof up to IP67 and it is available in stainless steel 316L. It can only work with a safety relay from the AWAX range. This solution is aimed to control access to very dangerous machines. It is highly recommended for the food industry (-25°C to +110°C).

  • The Trithon is CE, EN 60947-5-1 approved.

 

Epinus (use with Awax Safety Module):
Coded Switch with Integrated magnetic Latch for Moving Guards of Dangerous Machines, Stainless + 9 lbs Holding Magnet (pdf 264kb)

A coded safety switch with integrated magnetic latches 1, 2 or 4 kg. It is waterproof up to IP67 and is available in polycarbonate and in stainless steel 316L. This switch can only work with a safety relay from the AWAX range. This solution is aimed to control the access to dangerous machines. It is highly recommended for the food industry (stainless steel 316L, -25°C to +90°C).

  • The Epinus is CE, EN 60947-5-1/2/3 approved.

Safety Modules for Monitoring and Control of Safety Systems

Emergency Stop, Mechanical Switches, Interlocking System, BTI Switches, Manual or Automatic Reset

Awax 26XXL, AWAX 27XXL, AWAX 45XXL2:
Safety Modules for Monitoring & Control of Safety Systems (pdf 229kb)

Polyvalent safety relays with removable terminals, which allow to ensure the control of any safety switches with up to 2 auxiliary contacts as well as the safety switches with Acotom process. It is equipped 4 safety lines of 8A/250V. The DLC system is integrated (short-circuit detection). It is supplied with a dip switch, which allows the selection of the reset mode : automatic or manual.

  • The AWAX26XXL has been approved by C UL, CE.
  • The AWAX45XXL is C UL, UL, CE approved.

Please contact Cal-Centron for additional Information.

Copyright © 1999 - 2012 Cal-Centron. All rights reserved.