Burglar Alarm Module
Model: 95-898

Versatile, low cost, solid-state control module with full relay power output. Excellent protection for the home, office apartments, condominiums, etc. Easy to install. Features closed and open circuit loops. Built-in 3 to 11 minute adjustment reset timer. Will automatically reset if protective loop has been closed. The loops may be armed or disarmed anytime by a key switch. Operates on 6-12Vdc.

Deluxe Alarm Control Module
Model: 95-899

Same specifications as the 95-898, but with the added feature of entry / exit time delay circuit. Built-in 3-10 min, adjustable reset timer and sound alert entry reminder. Entry delay loop can be adjusted from 15 to 60 seconds. Exit delay is preset at 60 seconds. This entry time delay circuit saves the cost of an outside shunt switch. Also adds to your protection insides control switching with added nighttime protection while at home. Operates on 6-12 Vdc.

Electronic Latching Relay
Model: 95-914

Momentary input, latching output. Converts old style shunt panel to new multi-key system. Use to shunt an interior loop. Use as a lock-out on commercial systems. Programmable 6 / 12 / 24Vdc, SPDT relay with two (2) LED indicator outputs.

Low Current Relay Module
Model: 95-840

This unit switches a set of dry contacts DPDT rated at 5 amps@25Vac, 30Vdc. Supply Voltage, programmable 6 / 12 / 24Vdc. Current draw, 70mA when relay is active. Minimum pull voltage ±20% of operating voltage. LED power indicator. Mounts with foam tape.

24-Hour Panic & Fire Control Module
Model: 95-904

By adding this module to either the Calrad 95-898 or 95-899 alarms, or any other standard control center, you can have a 24-hour panic override switching circuit, even though your alarm is on or off. When triggered this control will activate either the alarm bell, siren or another independent alarm device. May also may be used for non-supervised open circuit heat detection.

Universal Timer
Model: 95-847A

This unit can be used for many applications, such as a dialer trip delay, bell shutdown timer or exit delay. Features: 1 Sec to 15 Min. adjustable. Relay output (N/C / N/O). Lower power drain. Transient protected. Voltage reversal protected. Auto reset. Totally enclosed package. Small size.

Digital One Channel Annual Event Timer
Model: 95-724A

Highly versatile 24 hour, 365 day, event timer. Designed to support a wide range of applications. Such applications include: Home and Building Automation, Security, Access Control etc. Equipped with form "C" relay contacts that provide many latching and/or momentary operations during a program schedule of your choice. The EE prom memory allows for programming of unit prior to/or during field installation. Events may be set for single or multiple operations on a daily and/or weekly schedule. The block programming feature enables repeating an event or any combination of consecutive days. 95-724A will compensate for daylight savings time if desired.  Individually selected holiday exceptions can be programmed to over-ride regularly scheduled events.