HST100 SERIES
Shrink Ratio: 2 to 1
A flexible, general purpose tubing for use where an adhesive seal is no needed. Conforms well to irregular shapes

• Insulation and strain relief for wire terminals
• Color-coding of electrical harnesses
• Wire bundling
• Self-extinguishing (except clear)

Colors: Black, clear, Red, Blue, Green, Yellow & White
Standard Cut Lengths: Bulk, 100', 25', 8', 4', 12", 6"
Pre-Shrink ID: 3/64", 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1", 1-1/2", 2", 3", 4"

HST200 SERIES
Shrink Ratio: 3 to 1
A flame-retardant tubing (except clear) with an internal layer of thermo-plastic adhesive which provides a barrier against contaminants. Still highly flexible for conforming to irregular shapes.

• Environmental protection for electronic components
• Protection of automobile, marine and truck wire splices and harness breakouts
• Adhesive-lining provides a seal against corrosion.

Colors: Black, Clear, Red
Standard Cut Lengths: 48", 12", 6"
Pre-Shrink ID: 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1"

HST300 SERIES
Shrink Ratio: 3 to 1
Tinted, semi-rigid adhesive-lined heat shrink tubing is the clear choice for insulating and color-coding small gauge wire connections. This tubing offers several distinct advantages:

• Tubing is tinted for color-coding, but is also translucent to allow the installer to view the underling material.
• Wire gauge imprint for ease of wire identification both before and after installation.
• Adhesive-lining provides a barrier against contaminants.

Colors: Clear, Red, Blue, Yellow
Standard Cut Lengths: 48", 12", 6"
Pre-Shrink ID: .115", .245", .360"

HST400 SERIES
Shrink Ratio: Exceeds 2-1/2 to 1
A semi-rigid tubing with a co-extruded integral adhesive lining. Provides a tough protective and insulating barrier, highly resistant to penetration by moisture and the attack of chemicals and solvents.

• Easy to remove once installed.
• Electrical wire splices, breakouts, connections and solder joints
• End-sealing of electrical cables and rigid tubing's.

Colors: Black, Red, Blue, Brown, Gray, Yellow, White
Standard Cut Lengths: 48", 12", 6"
Pre-Shrink ID: 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1"

HST500 SERIES
Shrink Ratio: 4 to 1
Colors: Clear
Standard Cut Lengths: 48", 12", 6"
Pre-Shrink ID: .220", .30", .35", .45", .70"

HST600 SERIES
Shrink Ratio: 6 to 1
Colors: Black
Standard Cut Lengths: 48", 12", 6"
Pre-Shrink ID: .75", 1.3", 1.75", 2.0", 2.75", 3.5", 4.7"

Both series are made of all weather, polyolefin tubing with a very active adhesive lining.

• Excellent for sealing multiple wires
• Puncture resistant and provides superior strain relief
  

HST700, HST800, HST850 SERIES
Shrink Ratio: Exceeds 3 to 1
A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermo-plastic adhesive provides superior environmental protection.

• Battery splices and terminals
• DIRECT BURIAL, UNDERWATER ENVIRONMENTS
• Meets UL486D
• Any connection in harsh conditions
• Adhesive-lining provides a barrier against contaminants.

Colors: Black, Red
Standard Cut Lengths: 48", 12", 6", 2", 1-1/2"
Pre-Shrink ID: .30", .40", .50", .75", .80", 1.1", 1.5", 2.0", 3.0", 4.5", 6.0", 7.0"