ELEKTRALINK™ SEALED MUTIPLE WIRE CONNECTORS™

Elektralink Home | Elektralink Solder Splice Kits | OptiSeal Butt Splice

Sealed Solder Connectors | Sealed Crimp & Solder Connectors | Sealed Crimp Connectors | Sealed Nylon Connectors

In-Line Multiple Wire Splices | Closed-End Connectors | Step Down Butt Connectors

Sealed Heat Shrink Tubing | Sealed Solder System for Battery Terminals | Installation Tools

ELEKTRALINK SEALED MUTIPLE WIRE IN-LINE BUTT CONNECTORS EXAMPLE

ELEKTRALINK SEALED MUTIPLE WIRE IN-LINE BUTT CONNECTORS

IN-LINE SPLICE CONNECTOR PROBLEMS & SOLUTION
PROBLEMS	ELEKTRALINK SOLUTION
EXISTING METHODS QUICK-TAP	SEALED MULTIPLE WIRE CONNCECTOR IN-LINE CONNECTOR
ADDING WIRE
UNSEALED CONNECTOR

THE ELEKTRALINK IN-LINE BUTT CONNECTOR COMPONENTS
The Multiple Wire Connector

ELEKTRALINK STEP DOWN CONNECTOR

Window for visual inspection

Crimp Indicators

Uniform copper wall - EASY to crimp

The inside AND the outside diameter of the connector is varied which means that both sides will make a sound mechanical crimp.

The barrel has two stripes - one on each end - to indicate which wire size to insert. Plus, the stripe matches the crimp die that needs to be used. For example, the blue stripe indicates the side where a 14 or 16 AWG wire is to be inserted, and it will be crimped in the blue crimp die.

EASY TO CRIMP...
PROVIDES STRONG CRIMP TERMINATION!

FEATURES OF THE CRIMP CONNECTOR

Seamless butt connectors provide superior crimp performance
Window in butt connectors allows for visual inspection to ensure all wires are fully inserted
Butt connectors have crimp indicators where the installation tool should be positioned to crimp connector
Wire-stop in butt connector prevents over-insertion of the wires

THE HEAT SHRINK TUBING

High adhesive-flow polyolefin tubing to seal multiple wires
Color-coded dash on tubing to indicate the wire gauge for the connector
Clear tubing to allow for visual inspection

OTHER'S STEP DOWN CONNECTOR

Thick copper wall - Difficult to crimp

The outside diameter of the butt connector is the same on both ends and only the inside diameter is adjustable for the different wire gauge. This means that the side for the smaller wire has a much thicker wall than normal and is extremely difficult to crimp. ALMOST IMPOSSIBLE TO CRIMP PROPERLY & WIRE CAN EASILY PULL OUT!

ELEKTRALINK SEALED IN-LINE BUTT CONNECTORS
Number	Wire Gauge	Tubing Color	Color Stripe On Connector	Wire	Crimp Die (Insulated)
CC-HL57-20	24-22 AWG	Clear / White Dashes	Side 1: White Side 2: Red	One 24-22 AWG Two 24-22 AWG	White (24-22 AWG) Red (20-18 AWG)
CC-HL57-16	20-18 AWG	Clear / Red Dashes	Side 1: Red Side 2: Blue	One 20-18 AWG Two 20-18 AWG	Red (20-18 AWG) Blue (16-14 AWG)
CC-HL57-14	16-14 AWG	Clear / Blue Dashes	Side 1: Blue Side 2: Yellow	One 16-14 AWG Two 16-14 AWG	Blue (16-14 AWG) Yellow (12-10 AWG)
CC-HL57-10	12-10 AWG	Clear / Yellow Dashes	Side 1: Yellow Side 2: Red	One 12-10 AWG Two 12-10 AWG	Yellow (12-10 AWG) Red (8 AWG)

SEALED MULTIPLE WIRE ASSORTMENTS

NSPA-9216 6 ITEMS / 28 PIECES	NSPA-5216 6 ITEMS / 55 PIECES

Elektralink Sealed Solder Heat Shrink Connectors are the clear choice of professionals who demand a superior electrical connection... Sealed Solder Connectors provide a high quality, sealed solder connection that takes the guesswork out of soldering.

DON'T SETTLE FOR THE AVERAGE CONNECTOR...
SEALED SOLDER CONNECTORS ARE THE BEST SOLDER CONNECTORS AVAILABLE!

Sometimes known as: Crimp N' Seal or Crimp and Seal

Please contact Cal-Centron for additional Information.