ELEKTRALINK™ SEALED SOLDER CONNECTORS™

Elektralink Home | Elektralink Solder Splice Kits

Sealed Solder Connectors | Sealed Crimp & Solder Connectors | Sealed Crimp Connectors | Sealed Nylon Connectors

In-Line Multiple Wire Splices | Closed-End Connectors | Step Down Butt Connectors

Sealed Heat Shrink Tubing | Sealed Solder System for Battery Terminals | Installation Tools

ELEKTRALINK SEALED SOLDER CONNECTORS EXAMPLE

ElektraLink is the clear choice of professionals that demand a superior electrical connection. Elektralink provides a high quality, sealed solder connection that takes the guesswork out of soldering.
Don't settle for the average connector... Get ElektraLink, the best connector available!

CUT-AWAY VIEW

Features & Benefits:

Translucent, adhesive-lined polyolefin tubing
- Allows visual inspection, prevents wire corrosion, and provides a waterproof seal
Easy installation with pre-measured solder
- Takes the guesswork out of the soldering process
A soldered electrical connection
- Provides superior current flow and tensile strength
Color-coded tubing with wire gauge imprint
- Provides easy identification of the correct part for the job

ELEKTRALINK SEALED SOLDER CONNECTORS (pdf 220KB)
Catalog includes expanded specifications and Sealed Solder Connector Assortment Kits

ELEKTRALINK SEALED SOLDER CONNECTOR ASSSORTMENT KIT PAGE

REDUCE COMMON PROBLEMS WITH EXISTING METHODS:
Corrosion on wire causes voltage drop.	Wire pulled loose due to strain or vibration	Standard terminal thickness (Red & Blue)

Cannot see whether terminal is properly installed.	Problems with improper crimps	.032" Thickness
ELEKTRALINK SOLUTIONS:
Adhesive-lined tubing prevents corrosion on the wire.	Solder termination provides maximum tensile strength & conductivity	Greater material thickness of terminal bare part - 25% more copper

Translucent tubing allows visual inspection of installation t		.040" thickness

Sealed Solder Connectors Video

Butt Connectors

Part Number	Gauge	Color	Description	Type
CC-ELA5-20	22-24 AWG	Clear	Standard	Standard
CC-ELA5-16	18-20 AWG	Red	Standard	Standard
CC-ELA5-14	14-16 AWG	Blue	Standard	Standard
CC-ELA5-10	10-12 AWG	Yellow	Standard	Standard

Ring Terminals

Part Number	Gauge	Color	Description	Type
CC-ELA120-02X	22-24 AWG	Clear	#2 Stud	Standard
CC-ELA120-04X	22-24 AWG	Clear	#4 Stud	Standard
CC-ELA120-06X	22-24 AWG	Clear	#6 Stud	Standard
CC-ELA116-06X	18-20 AWG	Red	#6 Stud	Standard
CC-ELA116-08X	18-20 AWG	Red	#8 Stud	Standard
CC-ELA116-10X	18-20 AWG	Red	#10 Stud	Standard
CC-ELA116-14X	18-20 AWG	Red	1/4" Stud	Standard
CC-ELA116-516X	18-20 AWG	Red	5/16" Stud	Standard
CC-ELA116-38X	18-20 AWG	Red	3/8" Stud	Standard
CC-ELA114-06X	14-16 AWG	Blue	#6 Stud	Standard
CC-ELA114-08X	14-16 AWG	Blue	#8 Stud	Standard
CC-ELA114-10X	14-16 AWG	Blue	#10 Stud	Standard
CC-ELA114-14X	14-16 AWG	Blue	1/4" Stud	Standard
CC-ELA114-516X	14-16 AWG	Blue	5/16" Stud	Standard
CC-ELA114-38X	14-16 AWG	Blue	3/8" Stud	Standard
CC-ELA110-10X	10-12 AWG	Yellow	#10 Stud	Standard
CC-ELA110-14X	10-12 AWG	Yellow	1/4" Stud	Standard
CC-ELA110-516X	10-12 AWG	Yellow	5/16" Stud	Standard
CC-ELA110-38X	10-12 AWG	Yellow	3/8" Stud	Standard
CC-ELA110-12X	10-12 AWG	Yellow	1/2" Stud	Standard

Spade Terminals

Part Number	Gauge	Color	Description	Type
CC-ELA220-02X	22-24 AWG	Clear	#2 Stud	Standard
CC-ELA220-04X	22-24 AWG	Clear	#4 Stud	Standard
CC-ELA220-06X	22-24 AWG	Clear	#6 Stud	Standard
CC-ELA216-10X	18-20 AWG	Red	#10 Stud	Standard
CC-ELA214-10X	14-16 AWG	Blue	#10 Stud	Standard
CC-ELA210-10X	10-12 AWG	Yellow	#10 Stud	Standard

Slip-On Connectors

Part Number	Gauge	Color	Description	Type
CC-ELA6-18F	18-20 AWG	Red	Standard	Standard
CC-ELA6-18M	18-20 AWG	Red	Standard	Standard
CC-ELA6-14F	14-16 AWG	Blue	Standard	Standard
CC-ELA6-14M	14-16 AWG	Blue	Standard	Standard
CC-ELA6-10F	10-12 AWG	Yellow	Standard	Standard
CC-ELA6-1oM	10-12 AWG	Yellow	Standard	Standard

Fully Insulated Slip-On Connectors

Part Number	Gauge	Color	Description	Type
CC-ELA6-18FF	18-20 AWG	Red	Standard	Fully Insulated
CC-ELA6-14FF	14-16 AWG	Blue	Standard	Standard
CC-ELA6-10FF	10-12 AWG	Yellow	Standard	Standard

ELEKTRALINK SEALED SOLDER CONNECTORS - SLIP-ON TERMINALS EXAMPLE

Recommended Butt Connections:

Strip the wires 3/8"
Select a connector that matches the wire gauge, slide it over one of the wires, separate the wire strands, and push them together to intermingle the wire strands.
Slide the connector and center the solder sleeve over the intermingled wire strands.
Apply heat evenly around the length of the tubing from the center out to the ends until the tubing recovers and the adhesive flows.
Continue distributing the heat over the solder sleeve until the solder flows into the wire strands. Remove the heat and let cool for a perfect connection.

For best results: Use a heat device capable of 500 °F. When using an open flame, do not isolate flame on one area of the tubing. Distribute the heat evenly. Failure to heat the connector until the solder is melted will result in an inferior connection. Overheating the connector may cause damage to the tubing. The use of an liquid flux is recommended, especially with used wire.

Please contact Cal-Centron for additional Information.