ELEKTRALINK™ SEALED SOLDER HEAT SHRINK SPLICE KITS

Elektralink Home | Elektralink Solder Splice Kits | OptiSeal Butt Splice

Sealed Solder Connectors | Sealed Crimp & Solder Connectors | Sealed Crimp Connectors | Sealed Nylon Connectors

In-Line Multiple Wire Splices | Closed-End Connectors | Step Down Butt Connectors

Sealed Heat Shrink Tubing | Sealed Solder System for Battery Terminals | Installation Tools

CUT-AWAY VIEW

Elektralink Sealed Solder Heat Shrink Connectors are the clear choice of professionals who demand a superior electrical connection... Sealed Solder Connectors provide a high quality, sealed solder connection that takes the guesswork out of soldering.

DON'T SETTLE FOR THE AVERAGE CONNECTOR...
SEALED SOLDER CONNECTORS ARE THE BEST SOLDER CONNECTORS AVAILABLE!

Elektralink Sealed Solder Heat Shrink Splice Kit
Order Number: EL-KIT
Price: $34.95 each

Kit Contents	Wire Gauge	Description	Part Number
25	22-18	Red	CC-ELA5-16
25	16-14	Blue	CC-ELA5-14
25	12-10	Yellow	CC-ELA5-10
1	-	High-Impact Plastic Storage Box	900-039

Professional Elektralink Sealed Solder Heat Shrink Splice Kit
Order Number: ELPRO-KIT
Price: $89.95 each

Kit Contents	Wire Gauge	Description	Part Number
25	22-18	Red	CC-ELA5-16
25	16-14	Blue	CC-ELA5-14
25	12-10	Yellow	CC-ELA5-10
1	-	Butane Soldering Torch Soldering Iron Kit (includes heat shrink tip, 4 soldering tips, and solder)	J-080KT
1	-	Multi-Function Tool Box with High-Impact Plastic Storage Box Tool Box size: 11.4" x 6.90" x 6.90"	SB-2918


Click Images for Larger View

ALSO SEE THE FULL LINE OF SEALED SOLDER ASSORTMENTS

Available Elektralink Solder Splice Sizes
Wire Gauge	Connector Color	Part Number
24-22	Clear	CC-ELA5-20
22-18	Red	CC-ELA5-16
16-14	Blue	CC-ELA5-14
12-10	Yellow	CC-ELA5-10
8	Red	CC-ELA5-8
Sold in 50 piece packs

Applications:

Ideal for wire splices on various automotive, watercraft and marine environments, motorcycle and ATV applications
Terminating wires to component terminals, such as motor tabs, connector pins, and switch terminals

Features:

Controlled soldering combined with heat shrink tubing in one step.
Transparent sleeves with color coded sealing rings easy to inspect.
Transparent outer layer, made from polyvinylidene fluoride (PVDF), which provides encapsulation, insulation and strain relief.
Refluxed solder ring (low temperature), offers controlled soldering process.
Solder ring provides maximum strain relief.
Thermoplastic inner insert at each end of the terminator, sealing against water and moisture.
Easy to use, and minimize damages to the termination; damages made from crimping.
Clear sleeve with color coded ring*, makes it easy to detect condition of wire splices.

* The color intensity on bands may vary slightly by production batch.

Recommended Butt Connections:

Strip the wires 3/8"
Select a connector that matches the wire gauge, slide it over one of the wires, separate the wire strands, and push them together to intermingle the wire strands.
Slide the connector and center the solder sleeve over the intermingled wire strands.
Apply heat evenly around the length of the tubing from the center out to the ends until the tubing recovers and the adhesive flows.
Continue distributing the heat over the solder sleeve until the solder flows into the wire strands. Remove the heat and let cool for a perfect connection.

For best results: Use a heat device capable of 500 °F. When using an open flame, do not isolate flame on one area of the tubing. Distribute the heat evenly. Failure to heat the connector until the solder is melted will result in an inferior connection. Overheating the connector may cause damage to the tubing. The use of an liquid flux is recommended, especially with used wire.

Please contact Cal-Centron for additional Information.