• Prevents power cables laid by others to cause video interference with your CCTV system
  • Prevents video signal distortion caused by video ground loops
  • Eliminates picture tearing, cross talk and rolling
  • BNC male to BNC female with 9” mini cable 15 on both sides
  • Passive, no power required, easy to add onto a CCTV system

  • Red & Black colored wires for easy polarity identification
  • Female Adapter Head
  • 3 Foot wire length

  • Broadcast one DVR or camera onto two separate monitors
  • Splits one video signal to two separate video signals
  • Red LED power indicator
  • 12 VDC (100 mA power consumption) - Plug in 12vdc Adapter Included
  • Can be looped with multiple GS-PVS2 units
  • Dimensions: Approximately 3" x 1 ½"
  • ABS Plastic

  • Fits: Empty Cans, GS-90 MB, GS-100 MB
  • Fits: CCTV Power Supplies

Enclosure Page

  • 6 or 12 VDC (Selectable)
  • Battery Back-Up / Charger

  • Protects equipment from high voltage surges from nearby lightning strikes.
  • Two stage protection: AC/DC 130V, AC/DC
  • Wide range of applications: DVR’s, CCTV/CATV system, CCTV camera’s, monitor’s, multiplexers &
    Quad processor, and more
  • 12VDC Transformer Included

  • Two piece set helps easily integrate IP cameras into an existing Coaxial/RG-59 based system and saving installation time and installing new cable
  • Transmits signals up to 650 feet instead of the 300 feet maximum with Cat6 Ethernet cables
  • Passive (no additional power needed)
  • Video Input: Female BNC Input

  • Amplifies Video signals up to 3200 feet over RG-59 Coaxial Cable
  • 4 BNC Inputs, 4 BNC Outputs with individual sharpness/brightness controls
  • May be connected to DVR's Cameras, Quads, etc.
  • 12VDC Transformer Included

Please contact Cal-Centron for additional Information.

Special Offers | Closeout Specials   |  Newsletter Signup  |  E-Mail 
  Terms and Conditions  |  Company Info  |  About Us  | Locate Us  |  Need-To-Know

Copyright © 1999 - 2012 Cal-Centron. All rights reserved.