Tone & Probe Kits by Tempo, Progressive Electronics, Greenlee, 701K, 711K, 801K, AT8K, AT8LK, 402K, 620KCE

Tone and Probe Kits

Tempo offers the most complete line of electronic products for tracing and identifying a wide range of wiring types, Tempo is the industry standard. These tracing and troubleshooting products are approved by users worldwide.

701K Classic Tone and Probe Kit

Model: 701K - Classic Tone and Probe Kit
Price: $106.50

When it comes to wire identification, there's no better tool to have than the 701K Classic Tone & Probe Kit, from the world's largest manufacturer of tone & probe kits! This popular tone & probe kit is used by techni- cians everywhere to identify single conductors or cables within a bundle at a cross-connect point, or at remote ends.

Kit Includes:

77HP High Power Tone Generator
200 EP Inductive Amplifier
Rugged, woven polyester 700C Dual Carrying Case

711K Professional Tone and Probe Kit

Model: 711K - Professional Tone and Probe Kit
Price: $125.41

Designed for the telecom professional, this kit is for use on single conductors, twisted pairs, coax cables and de-energized electrical wiring. The only thing missing is complexity.

The 77GX Tone Generator incorporates a host of features including microprocessor controlled circuitry for increased reliability, three selectable tone outputs for multiple line identification, two-line polarity indication for fast outlet checks and selectable power outputs for use on open or shorted pairs. The 200GX Inductive Amplifier features a simple, one-button operation and comfortable, ergonomic design. The adjustable volume control, LED visual signal strength indication, and powerful speaker make the 200GX ideal for noisy environments. To provide a single solution for the professional - Tempo's711K Professional Tone and Probe Kit combining the 77GX Tone Generator and 200GX Inductive Amplifier in a rugged carrying case.

Fast, Accurate Wire Identification
Rugged Industrial Design
Sends Tone to Identify Wires
Three Selectable Tone Outputs
Two-line Polarity Indication
Continuity Test
Adjustable Volume Control
Visual Signal Strength Indication
Powerful Speaker for Noisy Environments
Recessed Telephone Test Set Connectors

Kit Includes:

77GX Tone Generator
200GX Inductive Amplifier
Rugged, woven polyester 700C Dual Carrying Case

801K Premium Tone and Probe Kit

Model: 801K - Premium Tone and Probe Kit
Price: $173.72

Designed for more accurate wire identification, the 801K virtually eliminates power-related noise from their tone and probe operation. Our finest wire identification kit, the 801K Premium Tone & Probe Kit offers all the features professionals are looking for. Includes the 77HP/6A High Power Tone Generator with bent nose piercing clips, increased talk battery supply and higher voltage protection and the 200FP Filter Probe for filtering out AC hum. Tone probe and generator come housed in the rugged woven polyester 700C Dual Carry Case designed for years of dependable use. All components are also available separately.

Kit Includes:

77HP/6A High-Power Tone Generator with bent nose piercing clips
200FP Filter Probe (200FP/50 for export)
700C Dual Carry

AT8K AdapToner - Tone and Probe Kit

Model: AT8K - AdapToner Kit
Price: $144.21

Designed for fast, accurate wire identification by combining the features of our tone generators and modular breakout adapter. The AT8K Kit includes the AT8 Modular Breakout Tone Generator and the 200EP Inductive Amplifier in a convenient carrying case.

The AdapToner AT Series Modular Breakout Tone Generators make it simple to test any configuration of pairs in both 6 and 8 position modular jacks and plugs. Combining the features of our tone generators with a modular breakout adapter allows technicians to test continuity and polarity, send tone and supply talk battery to any pair in any configuration. With both a modular plug and jack on each unit, in-line testingis also made simple.

8-position "snag proof" modular plug
8-position jack with protective cover
Tone, continuity & talk battery supply using alligator clips
Selectable solid/warble tone signal
Quick reference guide with common wiring configurations
Weather-resistant design
Powerful receiver gain permits accurate identification in even the most congested cable bundles and equipment rooms
Includes a powerful, two-inch speaker and a recessed, on/off push button control
Includes an LED for visual signal strength indication
Offers adjustable volume control for more precise identification when tone signal “bleed” is affecting the identification process
Includes recessed tabs for buttset or headset connection
1-year warranty
Battery operated (9V not included)

AT8LK LAN Tone and Probe Kit

Model: AT8LK - LAN Toner Kit
Price: $149.82

To provide a single wire identification solution for the network professional, Tempo has developed the AT8LK - LAN Toner Kit combining the AT8L LAN Toner and the 200GX Inductive Amplifier in a rugged carrying case. This kit can be used on any wiring system including Datacom, Telecom,Security/Alarm, Audio and CATV.

Designed for network installation and maintenance, the new LAN Toner has the unique feature of sending tone in addition to blinking hub, switch port, and PC activity lights for fast identification. To meet the diverse demands of the network professional, the AT8L incorporates a host of features including two selectable tone outputs for multiple line identification, continuity testing, polarity indication for fast outlet identification, 8-position modular breakout tabs for testing both Datacom and Telecom, low battery indication and automatic shut-off to preserve battery life.

Trace wires and perform basic testing on Local Area Network cabling
Blink Hub, Switch Port and PC activity lights for fast identification
Detect active hubs and switches
LAN circuitry, tone generator, line checker and modular breakout adapter combined in a single unit
Send tone, check continuity and test polarity on any pair
Adjustable volume probe with visual-signal indicator
Special probe tip protects against damage to sensitive electronics

402K CATV Cable Tone Test Kit

Model: 402K - CATV Cable Tone Test Kit
Price: $158.94

Designed specifically for the CATV industry, the 402K Cable Tone Test Kit sends tone through any passive device along the cable path, such as splitters, traps and directional couplers. No more figuring out non-tagged or mistagged cable drops. The 402K is simple to use and provides fast, accurate results.

Transmitter and receiver are equipped with female F-type connectors and provide both audible and LED test and tone indications. Optional adapter test leads allow 402K use on distribution cables as well as wire pairs or signal conductors. User defined tone output allows up to four 402T Toner units to be used simultaneously for tracing multiple cable runs.

As a continuity tester, the 402K provides both audible tone and LED display to indicate resistance levels and identifies the presence of AC or DC voltage on the cable under test. The newly-designed 402R receiver provides three methods of signal reception:

Electrostatic pickup for non-terminated cables;
Electromagnetic pickup for terminated or shorted cables; and,
Direct connection when identifying in the presence of passive devices.

The 402K CATV Cable Tone Test Kit consists of one transmitter, one receiver, one male F-to-F connector adapter, one male F-to-alligator clip adapter cable and the rugged 700C Carrying Case (also available separately.)

Tone through splitters
Identify no-tagged cable drops
Identify mis-tagged cable drops
Fast, accurate cable identification
Sends tone to identify wires
Four distinct tone signatures
Simple to use
Adjustabble volume control
Visual and signal strength indication
Large speaker for noisy environments
Rugged industrial design

620KCE Security and Alarm Kit

Model: 620KCE - Security and Alarm Kit
Price: $146.83

To better satisfy industry requirements, we’ve combined the new Model PE620 Loop Verifier with the popular Model 200EP Inductive Amplifier in this convenient kit. Designed specifically for the security and alarm industry, the PE620 can be connected to a Normally Open or Normally Closed loop pair and provides a distinct audible tone when the alarm condition occurs. Both units fit comfortably in the rugged 700C Carrying Case made of durable woven polyester. 1-year warranty.

The non-latching feature provides a simple method for identifying intermittent failures (“swingers”) and confirming operation of switches at remote locations
In the latching mode, the unit will catch the alarm condition and continue sounding until the tester is reset
As a tone generator, the unit provides a traditional variable tone that can be applied using the 24" red and black test leads or a convenient 6-position modular plug
Convenient magnetic back plate allows the PE620 to be mounted directly to the control panel cabinet or door

Cabling Pouch

Model: 750C - Cabling Pouch
Price: $45.14

Designed to hold a complete set of wiring tools including: any (one) 77 Series Tone Generator, any (one) 200 Series Inductive Amplifier, a punch-down tool, a cabling knife and scissors.

Convenient loop to hold most telephone test sets
Removable “parts pouch” allows you to keep small components in reach Made of a durable woven polyester
Fits belts up to 5"

Tone and Probe Carrying Case

Model: 700C - Tone and Probe Carrying Case
Price: $17.19

Allows you to build your own kit using any tone generator and 200 Series Probe.

Durable woven polyester case.
Fits belts up to 3" wide.

Please contact Cal-Centron for additional Information.