tpi logo
fostoria logo
raywall logo
tpi logo 2
markel logo
GUARDED DIRECT DRIVE | SHUTTER MOUNTED DIRECT DRIVE | VENTURI MOUNTED DIRECT DRIVE | COMMERCIAL EXHAUST
CABINET EXHAUST | INDUSTRIAL BELT DRIVE | INDUSTRIAL DIRECT DRIVE | HEAVY DUTY BELT DRIVE | HEAVY DUTY DIRECT DRIVE
CABINET EXHAUST | EXHAUST FAN ACCESSORIES

WALL EXHAUST FAN ACCESSORIES

EXTERIOR WEATHER HOOD OPTION
tpi exterior weather hood option

Exterior Weather Hood Option

  • For IE, IED, EHB and EHD Models
  • Galvanized housing with 1/2 - 16 expanded metal bird screen
  • Can be used for intake or exhaust
  • Meets OSHA requirements
 
HEAVY DUTY EXHAUST SHUTTER

 

tpi heavy duty exhaust shutter

Heavy Duty Exhaust Shuttter

  • Aluminum construction.
  • Heavy duty blades.
  • Weather stripping for tighter seal.
  • Used to open Shutter when shutter is used to provide makeup air (Shutter should be one size larger than exhaust fan size and should be located on opposite wall)
  • Used for positive closure of exhaust shutter.
  • 115V or 230V, 60 HZ, 1Ø.
  • Inward opening blades for use with intake fans when shutter is located directly in air stream.
  • Galvanized construction.
  • 115V or 230V, 60 HZ, 1Ø.
 
FAN GUARDS

tpi fan guards
Bolt Together Wire Guards
24" - 48"

tpi fan guards
Expanded Metal Guard
12" - 18" - 20" - 60"

Rear Box Guard

  • For IE, IED, EHB and EHD Models
  • 1/4" Smaller than "B" dimension of fan
  • Meets OSHA requirements
 

tpi spiral guard

Spiral Rear Guard

  • For EHD Models Only.
  • Fits between motor and blade.
  • Rear guard installed at factory only.
  • Meets OSHA requirements.

Front Guard

  • For EHB, EHD, IE & IED Models
  • 1" Larger than blade size.
  • Meets OSHA requirements.

Please contact Cal-Centron for additional Information.

Special Offers | Closeout Specials   |  Newsletter Signup  |  E-Mail 
  Terms and Conditions  |  Company Info  |  About Us  | Locate Us  |  Need-To-Know

Copyright © 1999 - 2012 Cal-Centron. All rights reserved.