XTEND-2/T
10Base-T/10Base-2 Converter

Unicom's XTEND-2/T converter is designed to connect your existing Thin Ethernet adapter card or Thin Ethernet Network to a 10Base-T UTP network. This converter repeats signals from Thin Ethernet for transmission over Unshielded Twisted-Pair (UTP) cable to a 10Base-T hub. Includes an external power supply. Power: 9V DC 1.0A

NOTE: The ETP-20038T does NOT fit in any UNICOM Media Chassis.

XTEND-T/T
10Base-T/10Base-2 Extender

XTEND-T/FL (MM)
10Base-T/10Base-FL Multi-Mode Converter

The XTEND-T/FL Converter changes signals from 10Base-T UTP Ethernet to a fiber optic signal utilizing Multi-Mode (MM) fiber optic cable extending distances up to 2,000 meters. Available in a dual ST version only.
Power: 9V DC 1.0A

NOTE: The ETP-20108 does NOT fit in any UNICOM Media Chassis.

XTEND-T/FL (SM)
10Base-T/10Base-FL Single-Mode Converter

Unicom's XTEND-T/FL (SM) Converter is designed to connect your existing 10Base-T Ethernet network or workstations to a 10Base-FL network using Single Mode fiber optic cable. The converter repeats and converts signals from 10Base-T Ethernet to a 10Base-FL link, over distances up to 20,000 meters. The uplink button allows selection of a hub/switch or workstation connection using standard Category 5e patch cords. No more cross-over patch cords. The XTEND-T/FL (SM) provides activity LEDs simplifying troubleshooting and network maintenance. Available in a dual ST version only. Power: 9V DC 1.0A

NOTE: The ETP-20108-SM does NOT fit in any UNICOM Media Chassis.

XTEND-2/FL
10Base-2/10Base-FL Multi-mode Converter

The XTEND-2/FL converts and repeats signals from 10Base-2 Ethernet to 10Base-FL Multi-Mode fiber optic over distances up to 2,000 meters. It also provides backward compatibility for communication between FOIRL and 10Base-FL links up to 1,000 meters. The converter features a 2-position terminator switch (open or 50 ohm) for Thin Ethernet termination. Available in a dual ST version only. Power: 9V DC 1.0A

NOTE: The ETP-20118 does NOT fit in any UNICOM Media Chassis.

Trans-FL
10Base-2 (MM) Transceiver

The super-slim Trans-FL is a 10Base-FL transceiver that converts signals from your existing Thick Ethernet adapter card for transmission over Multi-Mode (MM) fiber optic cable. The unit has a set switch for enabling or disabling the SQE function. The Trans-FL also provides activity LEDs simplifying troubleshooting and network maintenance. Available in a dual ST version only.

Trans-10T
10Base-T Transceiver

Unicom's Mini and Super-Slim 10Base-T transceivers are small, lightweight transceivers designed to connect your existing Thick Ethernet Adapter Card to a 10Base-T UTP network. The super-slim model accomodates installation into narrow slot spaces, such as SUN SPARC™, IBM®, RISC/6000™ and Apple Macintosh™. The transceivers convert signals via an AUI connector to standard Ethernet for transmission over Unshielded Twisted-Pair cables.

Trans-One
10Base-T Transceiver (All-in-One)

Unicom's Trans-One is a 15 ft. long transceiver with an AUI connector on one end and a RJ-45 plug on the other. This combination makes the Trans-One not only perfect for IBM PCs, but also for SUN SPARC™, IBM®, RISC/6000™ and Apple Macintosh™ workstations with a narrow slot space design. The long cable also provides a single unit connection between the user's Thick Ethernet Adapter Card and a 10Base-T Hub.

Trans-2/5
10Base-T Transceiver

Micro-Net/FL4
4 Port Ethernet 10Base-FL Hub

XTEND-RS232TF
RS-232 Copper-to-Multi-Mode Fiber Converter

XTEND-RS485TF
RS-485 Copper-to-Multi-Mode Fiber Converter